You’ve just finished lunch and are ready to get back to work. You have a site in Liferay you use to manage your project, and before you left, you were about to create a folder in your Documents and Media library for sharing some requirements documentation. Sitting down at your desk, you navigate to the repository and attempt to create the folder.
You do not have permission to perform this action, Liferay helpfully tells you.
“What?” you blurt accidentally in surprise. “This is my project!”
“Ah, you too?” asks a co-worker helpfully from over the cube wall. “I lost access to a wiki I was updating just a few minutes ago. I was about to enter a support ticket for it.”
“Forget the ticket. Let’s go see the portal admin now,” you say.
And off you go, two floors down, to the far end of the building where, as you approach, you can already hear stress in the portal admin’s voice as he tries to reassure someone on the phone.
“Yes, Mr. Jones. Yes, I’ll fix it.” (Jones? The president of the company? goes through your mind.) “I’ll get on it right away, Mr. Jones. It was just a mistake; I’ll fix it. Thank you, Mr. Jones,” and he hangs up the phone.
“Problems?” you ask the portal admin, whose name is Harry. He does look rather harried.
“Yeah, Tom,” he says. “Somebody changed a bunch of permissions in the portal–it wasn’t me. I’m assuming you and Dick are here because of the same problem?”
“Yup,” you say. “I lost access to a document repository folder.”
“And I lost access to a wiki,” Dick says helpfully.
“It was probably due to some site membership change. Let’s take a look at the audit portlet in the control panel and see what happened.”
When in the course of human events it becomes necessary to see what users are
doing on your portal, you’ll find Liferay makes this easy. If you’re a Liferay
Enterprise Edition customer, you have access to two plugins–a hook and a
portlet–that, in combination with some settings in
enable you to see all the activity that occurs in your portal. Using this, you
can quickly find out what changes were made and by whom. If you’ve delegated
permission granting to any group of people, this is an essential feature you’re
likely to use.
We’ll come back to Tom, Dick and Harry’s story later in the chapter. For now, let’s look at how to install Liferay’s audit plugins so you can do the same thing Harry’s about to do.
Installing and Configuring the Audit Plugins
Liferay’s audit functionality is composed of two parts: a back-end piece that hooks into Liferay events and a front-end piece that gives you an interface to see what’s happening. Both of these plugins are included in the Audit EE app which is available on Liferay Marketplace. Please refer to this guide’s chapter on Leveraging the Liferay Marketplace for information on installing plugins.
Once installed, you can set two properties in your
to tweak the default settings.
com.liferay.portal.servlet.filters.audit.AuditFilter: By default, this is
false, because the audit plugins aren’t installed by default. When you
set it to
true, the audit hook is able to capture more information about
events, such as the client host and the client’s IP address.
audit.message.com.liferay.portal.model.Layout.VIEW: In Liferay’s code, pages
are referred to as layouts. Setting this to
true, therefore, records audit
events for page views. It’s turned off by default because this may be too
fine-grained for most installations.
Once you’ve decided if you’re going to use one or both of the two settings
above, place them in your
portal-ext.properties file and restart your Liferay
server. Once it comes up, audit events are captured by Liferay, and you’ll be
able to use them to see what’s happening in your portal.
Using Audit Events
Now that you’re capturing audit events, it’s easy to use them to view activities in your portal. Navigate to the Control Panel and you’ll find a new entry in the Configuration section called Audit Reports (see the figure below).
Clicking on Audit Reports shows you a list of the events Liferay has already captured (see the figure beblow), along with an interface for searching for events. You can browse the list but you’ll likely need to use the search to find what you’re looking for.
The figure above shows that Joe Bloggs logged in and performed some actions on the site. To view details about any of these events, all you need to do is click on an entry. You’ll then see something like the figure below.
As you can see, depending on how many users you have in your portal, this list
can get populated very quickly. For this reason, it’s a good idea to keep the
audit.message.com.liferay.portal.model.Layout.VIEW property set to
This way, you don’t clutter up your audit events with multiple page view events,
which will definitely be the most often triggered event in your portal.
Now that you know how to browse and view audit events, let’s learn how to search for specific events.
Viewing Audit Reports
Finding what you want in a big list of events is, to use the expression, like searching for a needle in a haystack. This is why the audit portlet provides a robust searching mechanism. By default, it looks pretty simple: there’s only a single field for searching. Clicking the gear icon next to the search bar, however, reveals an advanced search dialog broken out by various fields you can use in your search.
Let’s look at the options we have for search.
Match: You can search for matches to all the fields you’ve specified or any single field.
User ID: Specify the user ID you’d like to search for. This would be the user who performed some action in the portal you’d like to audit.
User Name: Specify the user name you’d like to search for. This is often easier than searching for a user ID, especially if you don’t have access to the Liferay database to find the user ID.
Resource ID: Specify the ID of the resource that was modified or viewed in this audit record.
Resource Name: Specify the name of the resource that was modified or viewed in this audit record. For example, you could search for User resources to see if someone modified a user’s account.
Resource Action: Specify an action that was performed on the resource. This
could be any one of the following:
Session ID: Specify the session ID to search for. You’d use this if you were correlating a session ID from your web server logs with activity in Liferay.
Client IP: Specify the IP address of the client that performed the activity you wish to audit.
Client Host: Specify the host name of the client that performed the activity you wish to audit.
Server Name: Specify the server name upon which the activity occurred. If you’re using a cluster, each member of the cluster can be individually queried.
Server Port: Specify the server port upon which the activity occurred. You’d need this if you run a “vertical” cluster of multiple VMs on the same machine.
Start Date: Specify the low end of the date range you wish to search.
End Date: Specify the high end of the date range you wish to search.
Using this form, if you wanted to check to see if someone in the portal unassigned a user from a particular role, you might search for a resource name of user and a resource action of unassign. The results of such a search might look something like the figure below.
Once you have the results of your search, you can click on any of the records returned to see the detail page for that record. The figure below shows, in this case, that the default administrative user removed the Power User role from Joe Bloggs.
As you can see, Liferay’s audit portlets give you a lot of power to see what’s happening in your portal. You can use this information to troubleshoot problems, determine ownership of particular actions, or, as Harry is about to do, find out who made permission changes they weren’t supposed to make.
Conclusion of the Story
“Okay,” says Harry, “let’s fire up Liferay’s audit system and see if we can figure out what happened.”
You and Dick stand behind Harry’s chair and watch as he enters a query into a form on the audit portlet. Clicking search, the screen fills up with audit events.
“Wow, that’s a lot of unassign events.” Harry says. “And look who the culprit is,” he adds sarcastically.
“Who’s Melvin Dooitrong?” Dick asks.
“That’s my new intern,” Harry says. “I’m gonna kill him.” Harry pushes out his chair and walks down the row of cubes to the end, where a kid no more than 20 years old with disheveled hair sits, earbuds in his ears.
“Hey Melvin,” Harry says as Melvin turns around to face him. “Didn’t I ask you to move that set of users from site membership to organization membership?”
“Yeah,” Melvin says, “I did that already.”
“How’d you do it?”
“It was going to take a while to do it manually, so I wrote a script and executed it in the scripting host,” Melvin replies, matter-of-factly.
“You did, did you? Well, guess what? Your script removed everybody from all sites.”
“Yeah, and now you’re going to start adding them back, one by one, manually, starting with Mr. Jones….”
Tom and Dick back away slowly from Melvin’s cube as Harry and Melvin continue to have their–let’s call it a discussion. One thing is clear: they’re having a better day than Melvin is.